Proctofoam-HC - For the relief of inflammation associated with hemorrhoids

Home \| Search \| Useful Links \| Contact Us \| Français

Directions for internal use

Directions for external use

The health information contained herein is provided for general informational and educational purposes only and is not intended to replace discussions with a healthcare provider. All decisions regarding patient care must be made with a healthcare provider, considering the unique characteristics of each patient.

Directions for internal use

Print the directions

Ensure that internal wing-tip cap has been placed on canister.

Hold canister in an upright position and shake vigorously for 20-30 seconds.

Withdraw the plunger slowly until it stops at the catch line. This is the dotted line near the top of the applicator barrel (see diagram). It's not the fill line.

Hold applicator by barrel. With index finger, hold plunger in place (see diagram). Holding canister in an upright position, place applicator tip over wing-tip cap and push down gently so that applicator is firmly attached.

Press gently down on the wings of the internal cap to release the foam. Only a short press is needed to do this. If needed, repeat until foam reaches fill line (see diagram).

Remove applicator from canister, leaving some foam on applicator tip. Hold applicator by barrel and gently insert applicator tip into the anus and then push plunger to release foam and complete treatment.

To clean, pull applicator and plunger apart and wash with warm tap water after each use. The wing-tip cap should be removed from the canister. The wing-tip cap and stem rising from the canister should be rinsed with warm tap water after each use.

Caution:
Never insert canister or internal cap directly into anus.

This web site will help you understand why you may experience some very unpleasant discomforts after delivery. >>>